If your lamp supports Push Button you can configure the push button to control your Casambi enabled lamps in multiple ways. To set the Push Button mode double tap the lamp control select ‘Lamp Settings’ and under Push Button tap the current mode to open the selection.There are five options that can be used: Controls this lamp, Cycle through modes, Control scene and Cycle scenes. 


Controls this lamp - controls one luminaire

This is the default setting. You can turn on and off the light with a normal click and dim the light by pressing down and holding the push-button. If you want to get the light brighter again just press and hold again and the light will become brighter.


Cycle through modes - controls one luminaire

If you have set modes to the lamp from Casambi app you can assign the push button to control the different modes. Modes can be different preset dimming levels, colours or colour temperatures. Clicking the push button will cycle between the different modes and off. Pressing and holding the push button will adjust the lamp brightness.


Control scene - controls one or multiple luminaires

If you have created scenes with Casambi app you can control them from a single push button. Just select which scene you want to control with the push button and then using the push button will control all the lamps in that scene. Turning on one lamp will turn on also all the other lamps in that scene. Pressing and holding will adjust the scene brightness.


Cycle scenes - controls one or multiple luminaires

If you have created different scenes with Casambi app you can cycle through them with one push button. Select the scenes you would like to cycle through and click the push button to cycle through the selected scenes and off. Pressing and holding will adjust the current scene brightness.


Active/Standby - controls one or multiple luminaires

With Active/Standby mode you can control two scenes that have same luminaires in them. Create two scenes, one active scene that should turn on with first press and one Standby scene that is turned on with second press. Pressing and holding will adjust the current scene brightness.