Casambi Support

Under 'More' tab you can find Timer, Switches, Network setup, Nearby Devices, Change Network, App Settings and FAQ.  Under Timer y...

With timer function you can create a list of timers, that will turn scenes or animations on and off based on time. For example, you can create a wake up li...

Go to 'More' tab and select 'Timer'. Create a new timer by tapping the ‘Add a timer’. Tap on the ‘Controlled scenes’ and select a scen...

If you have Casambi enabled switch or push button it will appear under Switches. From this screen you can configure what the button or buttons on the s...

To pair a new Xpress switch, press any two buttons on the Xpress switch and the Casambi app will automatically detect it. If you have an existing network, ...

Go to ‘More’ tab and tap on the Switches to configure the preset buttons. Tap on the Xpress and the configuration page opens. You can assign a scene, a gr...

Go to More tab and tap on Network Setup. From Setup screen you can access Network Settings, Sharing settings, Gateway configuration or configure all lamps...

In network settings you can change the name for your network, set the time zone and location. These are needed if you want to use sunset or sunrise as tri...

There are four different sharing modes: Not Shared, Administrator only, Password protected and Open. Not shared: The network is stored only local...

A network can have a (single) iOS or Android device working as a gateway. Other devices that have access privileges to the same network can connect via...