How to refresh the network.

Resumes automation. 

Please go to the bottom left tab "Luminaires" and press on the "@" button if you have Control hierarchy enabled. of resume automation

If you have manually controlled a luminaire, either via the Casambi app or via a Casambi enabled switch, and you wish the luminaries(s) to return to being controlled by network automation (i.e. Timers or Sensors), you have to "Resume automation" for the luminaire(s). Resuming automation is how to "remove manual control" from a luminaire(s).

Note: In order to "Resume automation", the "Control hierarchy" needs to be enabled in 'Control options'. 

https://support.casambi.com/a/solutions/articles/12000060060

schedules.

Please go to bottom right, settings -->Timer / Schedule, at the top of the list. 

Refresh a timer Timers only send commands to the network at the specific set times. If you program a timer to activate at a time that is earlier than the current time, it will not activate until the Switches ON time is next reached (e.g. The next day). If you wish a timer to refresh to a state that would currently be active, select Edit and then select the refresh button (spiral arrow) in the top left of the Timers screen, next to the +.

Configure all / refresh. 

Go to Settings--> Network settings --> Configure all Luminaires--> refresh 

• Restart network Can be used to restart the control hierarchy and mesh network. This can be useful if you wish to restart devices in order to test the most recent program setting (i.e. test if a recently programmed sensor triggers correctly) or if you delete a timer than may have already been running before it was deleted.

https://support.casambi.com/support/solutions/articles/12000074081-configure-all-luminaires

refresh networks from select network.

Check for device details. 

ADD MORE DETAILS RUSTY