Salvador Series 1000, Firmware and firmware updating

Modified on Mon, 17 Jun at 12:19 PM

Salvador firmware is unique to Salvador. The firmware utilised in not the same as other Casambi products. 

If Salvador firmware updates are required, each Salvador must be updated individually using the Casambi app. 

IMPORTANT! When paired to a network, Salvador’s communicate normally as part of the mesh. All programming and normal network communications are supported. The one unsupported aspect is that Salvador’s cannot transfer standard Casambi Firmware updates through the mesh. For this reason, any standard Casambi device in the network must always be within communication range of another standard Casambi device. See the diagram as an example.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article