Smart Switching

Smart Switching
With the Smart switch feature, ordinary mains wall switches can be used as dimmers or configured to control luminaires or scenes. This feature is only avai...
Tue, 8 Sep, 2020 at 9:17 AM
Dim and Save
By default, Casambi enabled luminaires are set to use the Dim and save Smart switch mode. This means you can use the luminaires’ power switch for dimming a...
Mon, 7 Sep, 2020 at 10:37 AM
Cycle through modes
If you have set different modes for the luminaire with the Casambi app you can assign the power switch to control them. Modes can be different dimming leve...
Mon, 7 Sep, 2020 at 10:38 AM
Control Scenes
If you have created different scenes with the Casambi app you can control them from a single power switch.  Turning on the luminaire that has this opti...
Mon, 7 Sep, 2020 at 10:39 AM
Cycle Scenes
If you have created different scenes with the Casambi app you can cycle through them and Off with one power switch. Select the scenes you would like to cyc...
Tue, 8 Sep, 2020 at 10:14 AM
Active/Standby
With Active/Standby Smart switch mode you can control two scenes that both have the same luminaires in them. Create two scenes, one scene that should t...
Mon, 7 Sep, 2020 at 10:41 AM
Emergency
This option is only available with Evolution networks. This feature can be used with a latching wall switch to create an ‘emergency switch’. A scene is ...
Mon, 7 Sep, 2020 at 10:43 AM
Not in use
Sometimes it is necessary that the power switch doesn’t do anything special when used. Not in use option will disable our Smart Switching feature.   
Mon, 7 Sep, 2020 at 10:43 AM