CBU-ARP, Introduction

Modified on Tue, 15 Oct at 1:45 PM

CBU-ARP-LR is a Bluetooth controlled, Casambi enabled one channel 0-10V controller with built-in 2.0 A relay and a motion sensor input.


CBU-ARP-LR is designed to control a single 0-10V LED driver. If the LED driver cannot be turned completely off from the 0-10V control interface, CBU-ARP-LR has a built-in 2.0 A relay for cutting the power from the driver. It also has a 12-24 VDC input for motion sensor. The sensor must be powered by an external power supply, such as mains voltage or auxiliary voltage from an LED driver.


The 0-10V output can also be configured as DALI interface which allows for much richer feature set, such as controlling multi-channel LED driver (up to five channels) and reading diagnostic information from the driver.CBU-ARP-LR can be controlled with Casambi app which can be downloaded free of charge from Apple App Store and Google Play Store. Different Casambi enabled products can be used from a simple one luminaire direct control to a complete and full featured light control system where up to 250 units form automatically an intelligent mesh network.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article