Please refer to the official website of the Digital Illumination Interface Alliance (DiiA) for all information related to DALI and its specifications (https://www.dali-alliance.org/).
• DALI specifications must not be exceeded. Examples:
• DALI bus current must not exceed 250mA.
• DALI bus voltage at every driver must be between 9.5-22.5VDC.
• DALI wiring must not exceed 300m.
• Only DALI device type 6 and device type 8 drivers listed on the DIIA website are suitable for use with the Salvador series.
• The DALI Power supply must meet the DALI standard requirements and be listed as approved on the DIIA website.
• If using D4i driver internal power supplies, ensure the DALI bus voltage is sufficient and/or not exceeded for the quantity of DALI drivers connected to the DALI bus. o Unused D4i power supplies must be disabled.
Casambi accept no responsibility for incorrect DALI operation cause by factors beyond our control. Such aspects include, but are not limited to:
• DALI wiring errors (physical connections, loose connections, polarity, cable type, cable lengths…).
• DALI bus supply voltage and current.
• Use of non-certified drivers.
• Interference on the DALI bus caused by external factors (such as electromagnetic disturbances or power surges and interruptions).
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article