Possible icon banners that may appear over the luminaire icon in the Luminaires tab:
Text | Notes |
Updating xx% | Firmware update progress percentage |
Update required | Newer firmware version is available |
Configuration failure | Hardware configuration error, IO failure, Incompatible hardware, Missing driver |
Driver failure | DALI specific driver failure |
Luminaire overheated | Device has exceeded its thermal specification |
Luminaire failure | Device profile is not correct for the connected load (e.g. a PWM4 set to 4 channel mode but only having 3 channels of LED strip physically connected) |
Short circuit | Short circuit detected |
Overloaded | Device is overloaded. May also be caused by excessive inrush current |
Open circuit | Device has detected that no load is connected |
Upgrade ready | Firmware ready to be upgraded from Classic to Evolution |
Example icons: 
Possible icon banners that may appear over the device icon in the nearby devices view:
Text | Notes |
Address match | Indicates a device previously “paired” to a network that may have been unpaired incorrectly. This banner can appear when using the “Replace device” option. |
Prototype | Devices without a correct master-key. Do not use for real installations |
Untrusted | Verification failed during device authentication. Reasons could be due to:
|
Example icon:
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article