Salvador Series 1000, using multichannel drivers

Modified on Wed, 26 Jun at 11:23 AM

Salvador Series 1000 supports DALI DT6, DALI DT8 and DALI D4i drivers.

However, drivers with multiple addresses (DT6 or any other device type) are not supported. Single channel DT6 with a single DALI address is currently supported. Equivalent functionality such as colour temperature and RGB controls are available from DT8 drivers that are supported, so it is recommend those instead. These appear as a single luminaire and allow colour temperature and colour controls.

If, in spite of that, you use multi-address drivers, they may appear as multiple luminaries in Casambi app allowing them to be used but not as intended. DT6 dual driver for tuneable white could be controllable as separate luminaries for cold and warm white channels instead of allowing setting colour temperature.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article