The DCS DALI Gateway profile (ID 9000) acts as a gateway between a wired DALI network and a wireless Casambi network. This allows control over the Casambi devices within the network through a DALI master:
For more information: https://support.casambi.com/support/solutions/articles/12000074044-dali-gateway
However, it does not allow to activate Casambi scenes from the DALI system.
The DCS DALI Gateway [scene control] (ID 30306) allows what ID 9000 does not: activate Casambi scenes from DALI system. The limit is 16 scenes.
The configuration must be done in both sides:
- Create the necessary scenes on Casambi side and configure them on the DCS DALI Gateway. Example:
- Address the devices on DALI software and match the scenes (if needed).
This profile also allows using a physical or logical push-button on the DCS DALI Gateway device, which will allow its usage as if it was a Casambi push button. Example:
The limit is 8 scenes.