- In the Luminaires tab, double tap BXT-130, scroll down and click "Learning on signal". Key in a value from 1-16, depending on the mapping table below.
| Button | Value |
| Push button 1/ Toggle button 1 ON | 1 |
| Push button 1/ Toggle button 1 ON | 2 |
| Push button 1/ Toggle button 1 ON | 3 |
| Push button 1/ Toggle button 1 ON | 4 |
| Push button 1/ Toggle button 1 ON | 5 |
| Push button 1/ Toggle button 1 ON | 6 |
| Push button 1/ Toggle button 1 ON | 7 |
| Push button 1/ Toggle button 1 ON | 8 |
| Toggle button 1 OFF | 9 |
| Toggle button 2 OFF | 10 |
| Toggle button 3 OFF | 11 |
| Toggle button 4 OFF | 12 |
| Toggle button 5 OFF | 13 |
| Toggle button 6 OFF | 14 |
| Toggle button 7 OFF | 15 |
| Toggle button 8 OFF | 16 |
As an example, you want to turn a television ON or OFF based on Toggle button 1.
2. Input value 1 to learn TV ON command.
3. BXT-130 LED will turn red.
4. Point your TV's original remote control to the red LED at a distance of 1-3cm, and then press the POWER button. The BXT-130 will flash twice if the learning is successful, and flash 6 times if learning is unsuccessful.
5. Next, input value 9 to learn the TV OFF command.
6. Repeat steps 3-4 for the infrared blaster to learn the TV OFF command.
