What is the infrared blaster's delay time?

A Casambi scene may trigger multiple toggle buttons of 1 Casambi IR blaster, causing it to emit multiple signals at the same time. The delay time will stagger the IR signals in the event that the appliance may not have received the IR signal. 

The default delay time between each signal is 300ms, but in some use cases, a longer delay time may be needed.

Here is how to increase the delay time: 

1. Double tap the device in the Luminaires tab, scroll down to the Parameters section, and select Delay time. 
2. Enter a value between 3 (300ms) and 20 (2000ms). Press OK to confirm. 
3. The new delay time is activated.