Salvador supports Startup ‘last state’ option when power is restored to a DALI driver that is controlled by Salvador.
Please note that Salvador firmware v2.10 or later is required.
To set this for one luminaire in a network:
- In the 'Luminaires' tab, double tap the luminaire icon whose function you wish to change.
- Scroll down to the "Startup state for power on" option and tap where it says 'Default mode'.
- Select "Last state" and tap 'Back' to exit the view.
- This luminaire is now set to return to its last state when it is powered ON.
To change this setting for all the luminaires in your network
- In the "More" tab select "Network setup".
- Tap on "Configure all luminaires".
- Select the "Startup -> last state" option and tap 'Back'.
- The "Startup state for power on" for all luminiares in your network has now been changed.