Products

Products

The wireless lighting control system shall be interoperable. The products shall be ready to connect to the control system or they can be enabled through devices which will make them compatible. 


Long range 0-10V, 1-10V or DALI control module: Wireless BLE control unit for any type of drivers with 0-10V, 1-10V or DALI dimming interface. With Standalone DALI it shall be possible to implement multi-channel lighting systems with adjustable colour (RGB and RGBW) or colour temperature (CCT). It shall be controlled wirelessly with smartphone and tablet applications using Bluetooth 5.0 protocol. Voltage range: 220-240 VAC, 50 Hz. Degree of protection: IP20. Frequency range: 2.4...2.480 Ghz. Maximum Output Power: +8 dBm. Indoor Range: Up to 50 m. Outdoor Range: Up to 200 m. (Maximum range may vary depending on the network mode and the physical environment the device has been placed in.)


2 channels 0-10V or DALI control module: Wireless BLE control unit that shall be configured to different operation modes. The control unit shall control one or two 0-10V controllable LED drivers, or it can control a tuneable white LED driver with two 0-10V control interfaces. The product can also be configured into a DALI mode where it can be connected to a DALI LED driver or DALI sensor for presence and/or daylight harvesting functions. It shall be controlled wirelessly with smartphone and tablet applications using Bluetooth 4.0 protocol. Voltage range: 100-240 VAC, 50 Hz. Degree of protection: IP20. Frequency range: 2.4...2.480 Ghz. Maximum Output Power: +4 dBm. Indoor Range: Up to 30 m. Outdoor Range: Up to 50 m.  (Maximum range may vary depending on the network mode and the physical environment the device has been placed in.)


Long Range Trailing edge-dimmer module: Wireless BLE mesh controllable enabled trailing-edge dimmer for operation of incandescent lamps, dimmable LED lamps and dimmable LED control gear. It shall be able to control up to 100W at 230 VAC. The maximum permissible load varies according to different load types. It shall be controlled wirelessly with smartphone and tablet applications using Bluetooth 5.0 protocol. Voltage range: 85-240 VAC, 50 or 60 Hz. Degree of protection: IP20. Frequency range: 2.4...2.480 Ghz. Maximum Output Power: +8 dBm. Indoor Range: Up to 50 m. Outdoor Range: Up to 200 m. (Maximum range may vary depending on the network mode and the physical environment the device has been placed in.)


Long Range PWM dimmer: Wireless BLE controllable four channel PWM dimmer for constant voltage LED loads, such as LED strips and constant voltage LED modules. The unit shall be powered by a 12-24 VDC power supply and be inline the constant voltage LED load. The maximum combined output current shall be 6 A which can be freely divided between 1-4 channels. It shall be controlled wirelessly with smartphone and tablet applications using Bluetooth 5.0 protocol. Voltage range: 12-24 VDC. Degree of protection IP20. Frequency range: 2.4...2.480 Ghz. Maximum Output Power: +8 dBm. Indoor Range: Up to 50 m. Outdoor Range: Up to 200 m.  (Maximum range may vary depending on the network mode and the physical environment the device has been placed in.)


DALI Gateway: Wireless BLE controllable DALI controller unit that is powered directly from a DALI bus. The unit can be used with a DALI sensor for presence detection or daylight harvesting, or it can be used for controlling DALI drivers that have an integrated DALI bus power supply. When used with drivers it shall support a range of options including DT6, DT8, Tuneable white control and RGB control. The unit shall also be used with a gateway profile that enables the wireless network to integrate with a DALI network. If used with the gateway profile, the unit shall provide the possibility to program, control and monitor the wireless network from DALI, including reading switch and sensor inputs. The wireless devices in the network can be addressed by the DALI controller software regardless of their types i.e. the wireless device does not have to be a DALI-controllable device. The DALI controller unit shall be controlled wirelessly with smartphone and tablet applications using Bluetooth 4.0 protocol. Voltage range: 9,5-22,5 VDC. Degree of protection: IP20. Frequency range: 2.4...2.480 Ghz. Maximum Output Power: +4 dBm. Indoor Range: Up to 30 m. Outdoor Range: Up to 50 m.  (Maximum range may vary depending on the network mode and the physical environment the device has been placed in.)


DALI Controller: Wireless BLE DALI controller unit capable of controlling up to 64 DALI drivers, integrating them into the wireless control system as virtual luminaires. This unit shall require an external power supply for the DALI bus. It supports industry standards such as DALI D4i, DALI DT6, and DALI DT8. Voltage range: 9,5-22,5 VDC. Max. DALI bus current: 250mA. Degree of protection: IP20. Frequency range: 2.4...2.480 Ghz. Maximum Output Power: +8 dBm. Indoor Range: Up to 50 m. Outdoor Range: Up to 200 m. (Maximum range may vary depending on the network mode and the physical environment the device has been placed in.)


DALI Controller with integrated power supply: Wireless BLE DALI controller unit capable of controlling up to 64 DALI drivers, integrating them into the wireless control system as virtual luminaires. This unit shall integrate power supply, internal Real-time clock (RTC) with backup energy storage, and cable strain relief to facilitate the installation process. It supports industry standards such as DALI D4i, DALI DT6, and DALI DT8. Voltage range: 100-240 VAC, 50-60Hz. Max. mains current: 70mA. Degree of protection: IP20. Frequency range: 2.4...2.480 Ghz. Maximum Output Power: +8 dBm. Indoor Range: Up to 50 m. Outdoor Range: Up to 200 m. (Maximum range may vary depending on the network mode and the physical environment the device has been placed in.)


Long Range Battery powered scene controller: Wireless BLE mesh unit with 2 dimming push buttons, 2 multi-purpose push buttons and 4 scene buttons. The 4 scene buttons shall give the possibility to recall scenes, recall animations or control one luminaire, a group of luminaires or all luminaires. The functionality of each button shall be configurable from the App. It shall be controlled wirelessly with Casambi smartphone and tablet applications using Bluetooth 5.0 protocol. Battery (included): CR2430. Degree of protection: IP20. Frequency range: 2.4...2.480 Ghz. Indoor Range: Up to 50 m. Outdoor Range: Up to 200 m. (Maximum range may vary depending on the network mode and the physical environment the device has been placed in.)


Energy harvesting switches: Energy harvesting switches that do not have battery power or mains power and whose form factor can be chosen. The kinetic push of the switch generates its own power and communicates directly to the mesh network via Bluetooth Low Energy. The switch shall be paired to the system via the App via Near Field Communication (NFC). The functionality of the switch shall be configurable via the App to either control individual luminaires, groups of luminaires or all luminaires. 


4 channel push button interface (battery powered): The interface shall be designed to connect any ‘normal open’ push button. 1 to 4 push buttons can be used and they shall be configurable from the App. Powered by a battery the interface doesn’t need more cabling than the wires between the interface and the push buttons. The box shall be small enough to fit any screw terminal. Each time a button is pressed the module will be activated for a few seconds and then goes automatically in a standby mode. Battery status can be checked in the App. 


4 potential-free button input module (230 VAC): The input module shall have up to 4 potential-free buttons. Each one of the buttons can be individually configured from an App. The module shall be supplied with mains voltage and can be installed in a flush-mounted socket. 


Passive Infra Red (PIR) Occupancy Detector & Photocell: A Passive Infra Red (PIR) Occupancy Detector & Photocell that can be [flush mounted / surface mounted]. The detector shall be mounted between [A] and [B] meters height. The detection range shall be a diameter of [C] meters at [D] meters height. The photocell shall have a detection range of [E] to [F] lux. The sensor shall require only the direct supply to 230VAC and operate in temperatures ranging from [G] ºC to [H] ºC. All configurations and runtimes shall be set using the App. 


Relay module: The relay module shall control luminaires and devices in BLE mesh network. The module shall be directly connected to 230VAC and its relay output shall have the capability to switch currents up to 10A. 


Blind actuator: Module for controlling blinds, roller shutters, raffstores, awnings or garage doors by App. The module shall have 2 inputs for isolated push buttons for local control (up-down). The module shall be directly connected to 230 VAC and its compact design shall allow an easy installation in flush-mounted box. 


Timer: Real time clock unit that shall allow to keep memory of timers for scenarios when power supply is missing or because of a temporarily black-out. It shall have an inside independent precision clock, with 24h working autonomy, and shall not need any battery. The device shall have a Normally Open input to able connection of a push button or an occupancy sensor. 


Signal converter to DMX: Wireless BLE controllable module that shall allow the control and management of DMX fixtures. This device shall be used together with a 12-24VDC Class 2 power supply. It shall be possible to configure the type of output from the App. 


Cloud  Gateway: The gateway shall allow remote control and monitoring of BLE mesh networks and integration to 3rd party systems via the Cloud and a Cloud API. Broadcom BCM2711, Quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz. 4GB LPDDR4-3200 SDRAM.  2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE. USB-C and Ethernet ports. Power over Ethernet (PoE) enabled. Operating temperature: 0 – 50º C ambient.


Ethernet Gateway: The gateway shall allow Ethernet-based on-premise integration of the BLE mesh networks into third party systems with integrated protocols such as BacNet/IP, MQTT, Eutrac Netcomposer (UDP), HelvarNet (TCP), ArtNet, UDP ASCII Commands.


Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article