Wiring:
Connect the CBU-DCS to the DALI bus using the provided connectors. Ensure the DALI bus is externally powered with a suitable DALI power supply. The CBU-DCS can be connected to DALI sensors or drivers with integrated DALI power supplies.
For more information, please see CBU-DCS's datasheet: https://casambi.com/ecosystem/cbu-dcs/
Installation:
Mount the DCS in a location that avoids large metal structures to ensure optimal Bluetooth connectivity. Strip the wire ends (6-8 mm) and insert them into the corresponding terminals, ensuring proper polarity.
The CBU-DCS must be paired in a Casambi network to act as a DALI Gateway and must have the correct fixture profile. To pair the CBU-DCS, open the Casambi app and navigate to the “Nearby devices” section. If you are within range of the device and the CBU-DCS is properly powered, it will appear there. Then select the CBU-DCS and use “Add to...” action. The app will show a list of the available networks. Select the one you want the CBU-DCS to be paired to.