Controlling one network
In the 'Networks' page it is possible to control a network in the same way as an individual luminaire. When selecting the network, all the luminaires inside the network will switch on or off. It is also possible to dim the whole network with swiping left or right, and colour temperature (if supported) can be changed by swiping up and down.
Double tapping a network will open it and from within that view it is then possible to control the network’s individual luminaires.
For more information about Basic gestures, see http://support.casambi.com/support/solutions/articles/12000021613-basic-gestures.
Controlling individual luminaire inside a network
Double tapping a network will open it and from that screen it is possible to control individual luminaires.
In the ‘Scenes’ tab it is possible to create Site-level scenes and animations.
Site-level scenes can include luminaires from different networks. Also a whole network can be selected into a scene. Individual luminaires can be selected by opening a network with double tapping on the icon. Creating and editing Site-level scenes is done in a same way as the network-level scenes.
For more information about creating scenes and animations, see http://support.casambi.com/support/solutions/articles/12000021615-scenes-and-animations.
For example, a location containing three office buildings could be combined into one Site. A Site-level Night scene could then be created which would set the luminaires in the receptions areas of each building network to 20% during night hours. This scene could then be activated manually or via a Site-level timer. See below.
It is possible to create site-level timers that control site- level scenes. Site-level timers can be configured in the Sites > More > Timers page. Site-level timers are configured in the same way as network-level timers.
For more information about Timers, see http://support.casambi.com/support/solutions/articles/12000021617-timer.
Continuing with the office location example above, a Site-level Night timer could be created to enable a Night scene to dim the reception area luminaires during the night.